- Details
- More images
- Reviews
Products description
Professional slot car regulator with very soft tap, ball bearing! current delivery time: 4 weeks
The regulator does not store any voltage and sends it back to the slot car, so it is absolutely legal!
The manufacturer is so convinced of his product that if something breaks the controller can be repaired free of charge, you only have to pay for shipping!
CarSteen model CS 4.2: Very light professional controller with extreme utilization of traction current, 4 different pre-settings of the curve possible! This means even more bandwidth for driving a wide variety of slot cars, plus an additional rotary knob (anti-slip), which can be used to minimize the slipping of the wheels in the curves.
You can move all slot cars with its fine adjustment, including case and operating instructions
These Carsteen controllers are really awesome, and worth every penny, after our last Mini-Z club race on our 32 meter long 4-track wooden track, we tested the CS1, CS2 and CS4, with all 3 controllers we drove 2 tenths after a few laps faster than with their own controllers, the testers usually drive ACD, DS-Witec, Kopriwa and some more or less known resistance controllers.
even more bandwidth for driving various slot cars. With its fine adjustment you can move almost all slot cars, including case and operating instructions
Controller cable is supplied with colored plugs for national use! Cable tie color for international use
These Carsteen controllers are really awesome, and worth every penny, after our last Mini-Z club race on our 32 meter long 4-track wooden track, we tested the CS1, CS2 and CS4, with all 3 controllers we drove 2 tenths after a few laps faster than with their own controllers, the testers usually drive ACD, DS-Witec, Kopriwa and some more or less known resistance controllers.
even more bandwidth for driving various slot cars. With its fine adjustment you can move almost all slot cars, including case and operating instructions
Controller cable is supplied with colored plugs for national use! Cable tie color for international use
The color of the controller housing may vary!
Controller is only suitable for positively regulated railways (no original Carrera rail)
Technical specifications:
5 steps, all the same size. The trigger response can be adjusted using profile switches to make the controller softer or more aggressive. The sensitivity can be adjusted from 0.4V to more than 6V. Amperage more than 250A. Output resistance less than 0.008 ohms. The voltage choke can reduce the output voltage by more than 3V, thus reducing the maximum speed. The continuously adjustable current choke increases the output resistance up to 0.25 ohms (<1 foot to 30 feet). Choke can be switched off. Anti-slip rotary knob (throttle) can be switched off Infinitely adjustable brake (0.06 ohms to more than 25 ohms). The regulated fan cooling ensures safe temperatures even with full choke in Eurosport and Wing Cars. Ball bearing trigger Voltmeter for checking the track voltage. Controller protected against incorrect connections. Circuit that limits the influence of varying track voltages.
CS-2 or CS-4?
Both the CS-2 and the CS-4 can be used for 1:32 finished vehicles up to Eurosport and Wingcars. The CS-2 can be used up to Cobalt 12 and I-15 without any problems, but I wouldn't recommend it for G-7. If you want to drive the G-7, you should use the CS-4. The reason is that a G-7 can draw up to 50A, and in this case the CS-2 will get hot (especially when the choke is in use). The CS-4 can handle a lot more heat because it has more transistors (the resistive inductor can handle more than 300A) and it has a larger heat sink. The CS-4 also has the anti-slip knob, which is intended for cars with very powerful engines, but has also proven to be very helpful for sensitive 1:32 finished vehicles, everyone should decide for themselves whether this is required.
Customer reviews:
Write the first Review!
This Product was added to our catalogue on 23/08/2021.
Payment methods
Die Box kann unter tpl_modified_responsive/boxes/box_miscellaneous.html verändert werden. Die Sprachvariablen befinden sich in der Datei tpl_modified_responsive/lang/german/lang_german.custom.
SlotManni © 2024 | Template © 2009-2024 by modified eCommerce Shopsoftware